VND
1. Designed for OMRON CJ1 series ports.
2. X215-3/X215-4/X215-7/X215-8 correspond to T007 terminal block, and all correspond to T063 conversion module, which canrealize full plug-in connection from PLC to signal terminal.
3. X215-9/X215-10 corresponds to the T066/T007 position control terminal block, which can realize the full plug-in connection of the position control module to the driver.
4. Minimize the probability of wrong wiring.
Note:
Please according to PLC and Terminal Block specifications, select the suitable cable.
Please don' t arbitrarily changed cable internal product.
2. X215-3/X215-4/X215-7/X215-8 correspond to T007 terminal block, and all correspond to T063 conversion module, which canrealize full plug-in connection from PLC to signal terminal.
3. X215-9/X215-10 corresponds to the T066/T007 position control terminal block, which can realize the full plug-in connection of the position control module to the driver.
4. Minimize the probability of wrong wiring.
Note:
Please according to PLC and Terminal Block specifications, select the suitable cable.
Please don' t arbitrarily changed cable internal product.
| Cable specification | AWG28 |
| Wire constitute | 7/0.127 |
| Conductors and insulators material | Conductor: soft copper wire; Insulator: PE |
| Twist and polishing | Filling: cotton thread; wrapping tape; paper tape |
| Appearance condition coating | PVC |
| Conductor resistance and insulation resistance | Conductor impedance: ≤239Q/Kn; Insulation resistance: ≥50MQ/Kn |
| Voltage resistance (air) | AC500V/min |
